I am making a flatbed trailer out of an old 60's era boat trailer a friend gave me. Below are two pics of it. First one is before I started with all the boat railing off of it. The second one is after I had shortened the tounge by three feet and painted. Updates will follow as I progress. This will not take long.
Total Pageviews
Thursday, January 10, 2013
Sunday, November 18, 2012
SHAKEDOWN RUN
Shake down run of Bike project - NOV 17. 2012
Finally got all the little parts back on bike and decided to take it for a short shakedown run...It runs and rides great...just a couple of minor adjustments and I am ready to cruise this coming summer.
When I rode it yesterday I realized I did not have the rear brakes adjusted correctly and subsequently I had not rear brakes.. Thru using the front brakes and downshifting I had no problems coming to a stop though. The fairing shakes so I have to brace it up some more. Don't know if it was like that before I bought it but I don't think it will survive long bouncing up and down so much. Otherwise it all seemed to work good. I only went about five miles and started and stop several times on the way.
My next ride will be at least 50 miles. Maybe I will do that today since the tempts are supposed to be close to sixty. Wish me luck.
Yall have a good day now...ya hear...Gob Bless
Finally got all the little parts back on bike and decided to take it for a short shakedown run...It runs and rides great...just a couple of minor adjustments and I am ready to cruise this coming summer.
When I rode it yesterday I realized I did not have the rear brakes adjusted correctly and subsequently I had not rear brakes.. Thru using the front brakes and downshifting I had no problems coming to a stop though. The fairing shakes so I have to brace it up some more. Don't know if it was like that before I bought it but I don't think it will survive long bouncing up and down so much. Otherwise it all seemed to work good. I only went about five miles and started and stop several times on the way.
My next ride will be at least 50 miles. Maybe I will do that today since the tempts are supposed to be close to sixty. Wish me luck.
Yall have a good day now...ya hear...Gob Bless
Friday, November 16, 2012
Update on Bike as of Nov. 16, 2012 - So I bit the bullet and removed the carbs again. I had ordered new jets for both carbs and replace them. I also added a spring on top of the sliders to help with the idling issue I have had. When these carbs first came out, the Bing CV carbs, they did not come with this spring. The sliders work on vacuum and they depend on a good vacuum to return them to the idle position. In later years BMW added these springs to correct the fact that the right amount of vacuum was not always the same especially after the sliders ware a little. Anyway I replaced all the jets and added these springs and the reinstalled the carbs. Wow what a difference. It starts and idles great now. I was tempted the buy new carbs until I found out the cost of them. They are over five hundred bucks each. So I just rebuilt the ones I have for a cost of less than two hundred for both. A huge savings and it runs like a BMW should now. Going to ride it this weekend end if all works out ok and weather permitting. Yall have a good day now. Ya hear. God Bless.
Thursday, November 8, 2012
Bike Update as of nov 8, 2012
I pulled both carbs off AGAIN!! I had ordered new jets and o-rings and installed them on both carbs....just waiting for one spring for the slides and I will put them back on. This should take care of my starting and idling problem....then onto the new back tire and install the new mufflers and i am ready for a test drive...I almost forgot...I also replaced the points and condenser...yes that is right ...this bike does not have electronic ignition.....old school for sure...
Yall take car now...yah hear...God Bless
Yall take car now...yah hear...God Bless
Thursday, October 11, 2012
BIKE PROJECT PROGRESS
Have bike all back together except install new mufflers I ordered.
Having trouble with the right carb. the idle mixture screw doesn't seem to make a change when I adjust it. Everything I read says I should check the valve clearance and ignition before doing much on the carbs. So I am going to replace the points and check the valve lash next. Hope I get this right. But these bikes for very forgiving and easy to work on so everything should be good. After all, this bike has not ran for the past 35 years and now it is running pretty decent. Amazing huh. Tough bike and good German engineering.
Wish me luck and if you have any suggestion just let me know. Especially any of you AIRHEADS out there.
Y'all have a good day now ya hear...and God Bless
Have bike all back together except install new mufflers I ordered.
Having trouble with the right carb. the idle mixture screw doesn't seem to make a change when I adjust it. Everything I read says I should check the valve clearance and ignition before doing much on the carbs. So I am going to replace the points and check the valve lash next. Hope I get this right. But these bikes for very forgiving and easy to work on so everything should be good. After all, this bike has not ran for the past 35 years and now it is running pretty decent. Amazing huh. Tough bike and good German engineering.
Wish me luck and if you have any suggestion just let me know. Especially any of you AIRHEADS out there.
Y'all have a good day now ya hear...and God Bless
Sunday, September 23, 2012
Update on Bike projet
In the past two weeks cleaned frame and all parts of bike that I did not remove. Parts I cleaned that I removed were the wheels, finders and all finer brackets. Replaced finders and wheels. Checked brake shoes. This bike is a 1972 so it has manual brakes with shoes. Replaced oil, oil filer and air filter. Cleaned and replace air filter housing, starter motor cover and alternator cover. Installed battery. Then restarted bike. Each time I start it now it runs better and better. Still have to sych the carbs. Never done that before but think I have it figured out how to do it. This is a good sounding bike and runs good as it sits. Next thing is to take it out for a shake down spin after putting a few more parts back on. Wish me luck. Yall have a good day now ya hear...God Bless
In the past two weeks cleaned frame and all parts of bike that I did not remove. Parts I cleaned that I removed were the wheels, finders and all finer brackets. Replaced finders and wheels. Checked brake shoes. This bike is a 1972 so it has manual brakes with shoes. Replaced oil, oil filer and air filter. Cleaned and replace air filter housing, starter motor cover and alternator cover. Installed battery. Then restarted bike. Each time I start it now it runs better and better. Still have to sych the carbs. Never done that before but think I have it figured out how to do it. This is a good sounding bike and runs good as it sits. Next thing is to take it out for a shake down spin after putting a few more parts back on. Wish me luck. Yall have a good day now ya hear...God Bless
Thursday, September 20, 2012
I know this is not a car but it is my next project. The is a 1972 BMW R75/5. A classic. 750 cc. All the bells and whistles for the day. This bike cost more than most cars in 1972. A friend of mine told me about this bike. A friend of his had it in his garage since 1977. He quit riding one day and just parked it. It is all original. I brought it home and tore it down to clean it up. The motor was locked up so I was able to purchase this bike for $350.00 and it had a clean title. A good buy I think but tons of work to do.
I managed to get the motor freed up. He has let it sit without every starting it again and with a full tank of gas. To make a long story short I was able to pour some PB Blaster into the spark plug holes and let it sit for a while. After I thought it has sat long enough with that in it I went out and pushed down on the kick starter. (The bike has both kick start and electric start - go figure - The Germans know how to engineer stuff for sure) Anyway after a few taps on the kick starter lightly the engine broke loose. I made sure I had spark and after cleaning the carbs (Bing carbs can be a bummer sometimes) I attempted to start it. It turned over but I did not want to tax the starter. So I left it alone for a couple of days. After turning it over daily for a bit I hooked up my battery charger and turn on to full boost. With the help of starting fluid is fired and smoke and fire belched out of the exhaust. I had removed the mufflers by the time. It only ran for a few seconds. I did this daily for a week and it progressively got easier to start and finally yesterday it ran for as long as I wanted to to. These bikes has a distinct sound because of the boxer engine. Ran it for no more that ten minutes since it is an air cooled engine and did not want to overheat it just sitting still like that. I AM NOW OFFICIALLY AN "AIRHEAD". Harley's are not the only bikes with a cool sound,. Yall have a good day now. Ya heaa - God Bless
Subscribe to:
Posts (Atom)

